Announcement

Collapse
No announcement yet.

How to Setup ICOM-V87 UHF Walkie Talkie

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • How to Setup ICOM-V87 UHF Walkie Talkie

    This should help those members who have ICOM IC-V87 Radio

    As an example if you want to set Channel 4, than follow the steps as given below.

    1: Press #V/M Key (second row last button) to toggle between Frequency & Channel mode, Select channel mode
    3: Type 4 6 2 6 3 7 - This will automatically pick up 462.6375
    4: Press Function Key (orange button on top right corner)
    5: Press * Key (channel number will start blinking, type 004 or use arrow keys to select channel 4)
    6: Press Function Key (orange button on top right corner) to Save Frequency on channel number 4
    7: By Default all channels are stored with 'L' low power
    This way you can set all 14 channels
    To change channel power to High or Low
    1: Press #V/M Key (second row last button) to toggle between Frequency & Channel mode, Select channel mode
    2: Press Function Key (orange button on top right corner)
    3: Press #V/M Key (second row last button) will select high or low depending what was the current power for the particular channel
    4: Power setting for channel will saved in step 3, to change power setting for channel repeat step 1&2
    Channel ----- Frequency (MHz)

    1---------------- 462.5625
    2---------------- 462.5875
    3---------------- 462.6125
    4---------------- 462.6375
    5---------------- 462.6625
    6---------------- 462.6875
    7---------------- 462.7125
    8---------------- 467.5625
    9---------------- 467.5875
    10--------------- 467.6125
    11--------------- 467.6375
    12--------------- 467.6625
    13--------------- 467.6875
    14--------------- 467.7125
Working...
X